How to 3D Print a Custom Multicolor Lamp Plate

A lamp plate is the flat front of the Customisable Lamp: your photo and words, printed in up to four filament colors and lit from behind. This guide takes you from a photo to a sliced file with the Lamp Plate Generator and a multicolor printer.

Ideas: what to make

What you need

The 3D Lamp Plate Generator: the settings sidebar on the left and the 3D preview of a white plate with a multicolor flamingo on the right.
The lamp plate tool: settings on the left, the 3D preview on the right.

Step 1: Set the plate size

The tool makes only the front plate. The lamp case comes from our free Customisable Lamp on MakerWorld (coming soon), which also makes simple one-color plates from text and SVG images. Enter the same values you used for the case: the size of the lamp, its wall thickness and a tolerance. The plate is made smaller than the lamp so it fits inside the walls:

plate size = lamp size − 2 × wall thickness − 2 × tolerance

The lamp plate size settings: lamp width, lamp height, corner radius, wall thickness and tolerance, with their default values.
The size settings with their defaults: 100 × 75 mm lamp, 2 mm walls, 0.25 mm tolerance.

With the defaults the plate is 95.5 × 70.5 mm. The corner radius and plate thickness are separate settings.

Step 2: Prepare the photo

Upload your image or pick one of the examples, crop it, then set its size and X/Y position on the plate. Photos with strong contrast and a simple background give the cleanest result. If the background is busy, use AI Remove BG: the AI runs inside your browser, so the photo never leaves your device, and it leaves just the subject on the plate color.

Step 3: Choose your filaments

The palette has up to four slots. Filament 1 is the plate color, and it is also part of the picture: pixels that match it simply show the plate. Filaments 2 to 4 are the inks. Start with four filaments and use Suggest to pick inks that fit your photo, or choose a preset. Fewer filaments means a faster print and less waste. The guide to choosing filament colors goes into detail.

The Design Palette panel of the lamp plate tool: white plate color, black, pink and teal inks, the text color and font menus, the ink preset menu and the Suggest button.
The palette: the plate color, three inks, the text color and font, and Suggest.

Step 4: Pick the style and add text

Choose Inlay (flush colors, the default), Raised or Cutout (engraved, one color); the style guide compares them. Then add text: set its size, line gap, alignment (left, center or right) and X/Y position to lay out several lines. Pick a bold font for small text, because strokes thinner than the nozzle may not print.

Step 5: Tune the image

Step 6: Check the print preview

The Print preview shows an approximation of how the nozzle fills each color on the front. Choose your nozzle, the wall generator and ironing, and see which thin parts of the picture and text survive. If details disappear, make the image or text larger, simplify the image with clean-up or fewer colors, or use a smaller nozzle. It is an approximation, not a slicer.

Two zoomed print previews of the same lamp plate. Without ironing the surface shows the lines of the nozzle path; with ironing it looks smooth.
The same area of the plate with ironing off and on.

Which side faces the build plate

The downloaded plate lies with its front facing up in every style, so the print preview and the ironing settings apply to the design:

Step 7: Download and slice

  1. Download the .3mf. It contains one object per color, in palette order, so filament 1 comes first.
  2. Open it in your slicer and check that every part uses the filament you expect. Swap the slot assignments if your spools are loaded differently.
  3. The file carries a default Bambu Lab A1 profile (0.4 mm nozzle, 0.20 mm layers). Select your own printer and profile before slicing.
  4. The Print profile settings above the download button (wall generator, ironing type and flow) are saved into the .3mf. Check them in your slicer and set them by hand if they are missing.
  5. Keep the prime or purge tower enabled, as for any multi-filament print.
  6. Inlay and raised depths print best as a multiple of your layer height. The default 0.8 mm is four layers at 0.2 mm.

Not sure yet? The tool page has a free example .3mf to open in your slicer and try these settings on.

Slicer settings for the best detail

Ironing flow: the default (10%) is often too low. In our experience 15% is better and around 20% works best, but it varies between filaments, so test with yours and stop if you see ridges or blobs.

If the lamp will be lit

Troubleshooting

Ready to design your plate? Set the lamp size, add your image and text and check the print preview.