Lamp Plate Player Card

3D Lamp Plate Generator

Reset everything on this page to the defaults and forget the saved settings and images.
? Turn this off to prevent browser lag when making rapid slider adjustments or using high image resolutions. Then apply your changes with the round button in the corner of the 3D view.
? Enter the lamp's own width, height, wall thickness and tolerance. The plate is made smaller than the lamp by twice the wall thickness and tolerance, so it fits inside the walls.
100
75
15
2
0.25
1.5
Plate size -
5.5
9
? Upload any image format! You can use our built-in AI to remove the background, or directly upload a pre-edited transparent PNG. Play around with the examples below or upload your own photo.
0°
⚠️ AI background removal is a heavy task and may take up to a minute. Please be patient!
96
0.8
10
-10
92
5
⚠️ High resolution! This may cause severe browser lag. Uncheck 'Auto-Update' and use the manual update button. Note: Higher resolution models also require a smaller 3D printer nozzle (e.g., 0.2mm) for the fine details to print properly.
512
127
127
Print profile settings
20

These settings are saved in the downloaded .3mf, but the slicer may not apply them. Before printing, check the wall generator and ironing in your slicer and set them by hand if they are missing.

Note: If you buy the pass in this browser, this is the ONLY browser where you will have access. Make sure you are on the device you want to download from!

About this tool

Design the front plate for the Customisable Lamp. Enter the lamp's size, wall thickness and tolerance, add your text and an image, and the generator sizes the plate to fit. Choose a flush color inlay, a raised design or an engraving, check the print preview and download a multicolor .3mf, one object per color. Make a night light or a gift with your best memories: a family photo, your pet, a trip, names and a date.

Read the lamp plate guide, or browse all guides.

Free version on MakerWorld

Our free Customisable Lamp on MakerWorld generates the whole lamp, with a front plate made from text and SVG images in a single color. This generator is the full version of the front plate: your own photo, AI background removal, up to four filament colors, three styles and a print preview. It makes only the plate, so generate and print the lamp case on MakerWorld, then enter the same values here (width, height, corner radius, wall thickness, tolerance and plate thickness) so the plate fits.

MakerWorld model coming soon

Free example

An example of a .3mf file made with this tool, free to download. Open it in your slicer to see how it works and looks: turn ironing on and off, switch the wall generator between Arachne and Classic, and choose another nozzle diameter to see how each affects the print.

Download example .3mf

How to use

  1. Set the lamp dimensions, wall thickness and tolerance.
  2. Upload or pick an image, crop it and optionally remove the background.
  3. Choose 2 to 4 filaments and their colors, then the style and algorithm.
  4. Add text and position it, and open Print preview to check the fill.
  5. Download the .3mf and open it in your slicer, for example Bambu Studio.

Tip: if the first result is not what you want, keep experimenting. Try another Algorithm or Dither, change Brightness, Contrast, Clean-up or Resolution, pick other filament colors or let Suggest choose them, and compare the results in the 3D view and in Print preview to see how the print will come out.

FAQ

What does the download cost?

The generator is free to try. A single plate export is $1.29, or a 24-hour pass is $2.99 and works in the browser where you buy it.

Are my photos uploaded anywhere?

No. Everything, including the AI background removal, runs in your browser, so your images never leave your device.

Is the print preview exact?

No. It is an approximation of how the nozzle fills each color. The real result depends on your slicer settings and printer.

All tools · Guides · Image2Filament

Not affiliated with Bambu Lab. Your images are processed in your browser and never uploaded.

Legal notice · Privacy policy · Terms of service · Refunds · Licenses

Print preview

An approximation of how the nozzle fills each color, not a real slicer (the spiral patterns are approximated). Ironing hides the top surface pattern. Scroll to zoom, drag to move, double-click to fit.

AI is working its magic...

This runs entirely in your browser. It may take up to a minute depending on your device.