Lamp Plate Player Card

3D Player Card Generator

Reset everything on this page to the defaults and forget the saved settings and images.
? Turn this off to prevent browser lag when making rapid slider adjustments or using high image resolutions. Then apply your changes with the round button in the corner of the 3D view.
60x90 mm 100
2
5
11
5.5
5
? Upload any image format! You can use our built-in AI to remove the background, or directly upload a pre-edited transparent PNG. Play around with the examples below or upload your own photo.
0°
⚠️ AI background removal is a heavy task and may take up to a minute. Please be patient!
48
0.4
25
0
0
5
⚠️ High resolution! This may cause severe browser lag. Uncheck 'Auto-Update' and use the manual update button. Note: Higher resolution models also require a smaller 3D printer nozzle (e.g., 0.2mm) for the fine details to print properly.
512
127
127
Print profile settings
20

These settings are saved in the downloaded .3mf, but the slicer may not apply them. Before printing, check the wall generator and ironing in your slicer and set them by hand if they are missing.

Note: If you buy the pass in this browser, this is the ONLY browser where you will have access. Make sure you are on the device you want to download from!

About this tool

Create a personalised 3D-printable player card from any photo. Crop the picture, remove its background with AI, choose up to four filament colors and let the generator turn it into layers for a multicolor printer. Pick a Raised, Inlay or Cutout style, add a rating, position and name, check the print preview and download a .3mf with one object per color. A great gift for a team, a birthday or any sports fan.

Read the printing guide, or browse all guides.

Free version on MakerWorld

Want to try it first? Our free Custom Football Player Card Maker on MakerWorld lets you customize and print a card for free, with a fixed set of pre-made images. This generator is the full version: your own photo, AI background removal, up to four filament colors, three styles, a print preview and print profile settings.

Open on MakerWorld ↗

Free example

An example of a .3mf file made with this tool, free to download. Open it in your slicer to see how it works and looks: turn ironing on and off, switch the wall generator between Arachne and Classic, and choose another nozzle diameter to see how each affects the print.

Download example .3mf

How to use

  1. Upload or pick an example image, crop it and optionally remove the background.
  2. Choose 2 to 4 filaments and their colors, or let Suggest pick inks from your image.
  3. Set the algorithm, style and size, then add the rating, position and name.
  4. Open Print preview to see roughly how the nozzle will fill each color.
  5. Download the .3mf and open it in your slicer, for example Bambu Studio.

Tip: if the first result is not what you want, keep experimenting. Try another Algorithm or Dither, change Brightness, Contrast, Clean-up or Resolution, pick other filament colors or let Suggest choose them, and compare the results in the 3D view and in Print preview to see how the print will come out.

FAQ

Are my photos uploaded anywhere?

No. Everything, including the AI background removal, runs in your browser, so your images never leave your device.

What does the download cost?

The generator is free to try. A single card export is $1.29, or a 24-hour pass is $2.99 and works in the browser where you buy it.

Is the print preview exact?

No. It is an approximation of how the nozzle fills each color. The real result depends on your slicer settings and printer.

All tools · Guides · Image2Filament

Not affiliated with Bambu Lab. Your images are processed in your browser and never uploaded.

Legal notice · Privacy policy · Terms of service · Refunds · Licenses

Print preview

An approximation of how the nozzle fills each color, not a real slicer (the spiral patterns are approximated). Ironing hides the top surface pattern. Scroll to zoom, drag to move, double-click to fit.

AI is working its magic...

This runs entirely in your browser. It may take up to a minute depending on your device.